User Guide Part 1
Installing the Main and Remote Unit Mounting Brackets Preparing the RBS Site
2-6 Ericsson Proprietary 92-F0423-1
Installing the Remote Mounting Brackets on a Monopole
)LJXUH ¥VKRZVDW\SLFDOLQVWDOODWLRQIRUDPRQRSROH)RUWKHUHTXLUHGPDWHULDOVDQG
LQIRUPDWLRQIRULQVWDOODWLRQFRQWDFW\RXUPRQRSROHSURYLGHU
7KHPRXQWLQJEUDFNHWPXVWEHLQVWDOOHGVXFKWKDWLWLVZLWKLQ¨LQPPRI
SOXPERYHUWKHOHQJWKRIWKHPRXQWLQJEUDFNHWWKDWLVZLWKLQRIYHUWLFDO
Figure 2–5 RBS Remote Unit Mounting Bracket for Pole Mounting
Steps
To install a remote unit mounting bracket on a monopole
$WWDFKWKHPRQRSROHFODPSULQJVDWDKHLJKWWKDWDIIRUGVDPLQLPXPRIGLVWDQFH
IURPWKHUHPRWHXQLWVWRWKHDQWHQQDV)RUWKHPRXQWLQJEUDFNHWKROHORFDWLRQVVHH
)LJXUH ¥RQSDJH
0RXQWVWUXFWXUDOFKDQQHOWRWKHPRQRSROHFODPSULQJVWDQGRIIV
)DVWHQWKHUHPRWHXQLWPRXQWLQJEUDFNHWVWRWKHVWUXFWXUDOFKDQQHO
CAUTION
To avoid RBS overheating, the remote unit mounting bracket must be
mounted such that it is within 0.160” in. (4.06 mm) of plumb over the
length of the mounting bracket (that is, within 0.25° of vertical).
Must be within 0.160 inches (4.06 mm) of
plumb over the length of the mounting
bracket (that is, within 0.25 degrees of vertical)
in all directions
Side View
Mounting
bracket
Monopole
Monopole
clamp rings
Structural
channel
Top View
Remote
mounting
brackets
Monopole
clamp rings
Note:
Contact your
monopole
provider for
all monopole
accessories.