User's Manual
B2CH079AA Product Manual – ERM2, 5 GHz WLAN Radio Module
November 2007 Page 8 of 14
PM-B2CH079AA Version 2
Final Product Requirements
The requirements below apply to any final product in which the B2CH079AA module is installed.
Antenna Usage and Module Transmit Power
B2CH079AA module shall only be used in conjunction with the following antenna
types as outlined in the table that follows:
Antenna Models and Maximum Allowable Power Setting
Frequency
Band
Channels Location Maximum Rated Transmit Power with Antenna Type
5.730 – 5.845 GHz 146 to 169 Indoor /
Outdoor
Antenna Gain Max Rated Transmit
Power
MaxRad MMO58004NF 4 dBi 20 dBm
MaxRad MMO58010NF
MTI MT-482003/N
10 dBi 20 dBm
BelAir BMA000210 10.5 dBi 20 dBm
BelAir BMA000203 15 dBi 20 dBm
H+S SPA 5600/9/23/0/V 23 dBi
+
20 dBm (P2P)* else
13 dBm
MTI MT-486001 28 dBi
+
20 dBm (P2P)
* else
8 dBm
MTI MT-485028/N
22 dBi
+
20 dBm (P2P)
* else
14 dBm
MTI MT-485001
19 dBi
20 dBm (P2P)
* else
17 dBm
MAXRAD
WISP4959018MBV
15 dBi
20 dBm (P2P)
* else
21 dBm
Andrew P2F-52-NEA
30 dBi
+
20 dBm (P2P)
* else
6 dBm
In order to comply with the FCC and Industry Canada rules in the USA and Canada,
respectively, it is required to respect the maximum transmit power limits as follows
for each of the antenna types. +, * see notes following :