User's Manual

RAR20005003 Product Manual – 5 GHz WLAN Radio Module
Page 7 of 12
Final Product Requirements
The requirements below apply to any final product in which the RAR20005003
module is installed.
Antenna Usage
RAR20005003 module shall only be used in conjunction with the following
antenna types:
• BelAir Networks model: BMA000203, 15 dBi directional antenna,
horizontal beamwidth 45 degrees.
• BelAir Networks model: BMA000221, 12.5 dBi directional antenna,
horizontal beamwidth 45 degrees.
• BelAir Networks model: BMA000210, 10 dBi directional antenna,
horizontal beamwidth 65 degrees.
Warning: Use of this module in conjunction with any antenna not expressly
listed above may void authority to install or operate this equipment.
Product Installation
Products which contain RAR20005003 shall only be installed by professional
installers trained by BelAir Networks or its authorized agents. In addition to
normal installation procedures and good installation practice, professional
installers are responsible to ensure that:
1. Only an approved antenna (see above) is connected to the module,
2. The antenna is mounted in such a manner and in such a location that access
to the antenna by the general population is minimized. During normal
operation, access to the antenna by the general population should be limited
to greater than 25cm.
3. Only the approved BelAir Networks AC power cable (model BMC200003)
may be used when this module is deployed with the BelAir200 product.
Use of any other power cable may void the regulatory approvals of the
BelAir200 and is prohibited. The BelAir-supplied power cable includes