User's Manual

B2CH072AA Product Manual –4.9 GHz Public Safety Band Radio Module
Page 8 of 13
Product Installation
Products which contain B2CH072AA-A shall only be installed by professional
installers trained by BelAir Networks or its authorized agents. In addition to normal
installation procedures and good installation practice, professional installers are
responsible to ensure that:
Only an approved antenna (see above) is connected to the module, and the antenna
is mounted in such a manner and in such a location that access to the antenna by the
general population is minimized. Access to the antenna by the general population
should be limited to more than the minimum safety distance. This distance is:
RF Exposure
Radios
Minimum
Safety
Distance
Radios
Other
combinations
Minimum
Safety
Distance
BelAir50C
BelAir50S
Radios
1 x RAR20004001
(PSM1) w. 21 dBi
antenna
40 cm ( 16
inches)
NONE
-------
BelAir100
BelAir100S
BelAir100C
Radios
1 x RAR20001003
and 23 dbi antenna
1 x RAR20004001
(PSM1) w. 21 dBi
antenna
60 cm ( 24
inches)
1 x RAR20004001(PSM1)
w. 9 dBi antenna and 1 x
RAR20000003 (ARM3)
20 cm ( 8
inches)
BelAir200
1 x RAR20001003
and 23 dbi antenna
and 1 x
RAR20004001(PS
M1) w. 21 dBi
antenna and 1 x
RAR20000003
(ARM3)
72 cm ( 28.3
inches)
1 x RAR20004001(PSM1)
w. 21 dBi antenna1 x
RAR20001003 (BRM3)
with 15 dBi ant.and 1
RAR20000003 (ARM3)
50 cm ( 20
inches)
Adherence to these rules by the professional installer is mandatory. See full
installation procedures for the particular product for details.