User's Manual

Limited Internal
CONFIGURATION DATA 2 ( 11 )
EIN/R/I Anders Larsson 1/1551-COH 109 334/1 Uen
ERA/RGG/TOC Jan Lundkvist 2002-06-03 A
Prepared (also subject responsible if other) No
Approved Checked Date Rev Reference
E
1 RBS 3202 Configuration Data
1.1 Introduction
This document describes standard HW configurations of the 3202 radio base
station.
1.2 Purpose
The document is intended to be used as reference material when an RBS site
is engineered.
2 Standard Configurations
The RBS 3202 is currently only available in the 1*1, 2*1, and 3*1 configurations.
All three configurations are housed in on single radio rack.
The RBS comprises at least of one cabinet with three subracks: Baseband
(BB), Radio Frequency (RF) and Multiple Carrier Power Amplifier (MCPA)
Subracks (see figure 1). The capacitor unit (CU) is a subrack external unit.
2.1 1*1 Configuration
The 1*1 configuration has one sector with one TX-antenna