User's Manual

Open Information
DESCRIPTION 18 ( 19 )
ERA/RGN/PD Rikard Schönbeck 5/1551-HRB 105 102/1 Uen
ERA/RGG/TOC Jan Lundkvist 2002-05-28 B
Prepared (also subject responsible if other) No
Approved Checked Date Rev Reference
E
• The AIU has RF jumpers or cables to allow for different RBS configurations
with the same unit. The jumpers connect combiners and splitters that are
applicable for a certain configuration.
7 Operation & Management
This section describes different tasks included in O & M of the RBS 3202.
7.1 Standard Operation
The RBS needs to be configured to suit the requirements of the operator,
special Configuration Operating Instructions give information regarding different
configurations.
The RBS is monitored by aid of the RBS Element Manager (EM). The EM
is accessed by connecting a thin client to the Site LAN connection plate.
Instructions on how to configure and connect a thin client to the RBS is found
in
PRODUCT HANDLING .
For a detailed description of the EM, please refer to
ELEMENT MANAGER .
The following are tasks performed via the EM:
• RBS EM topology view handling
• Configuration management
• Software management
• Alarm management
• Restart
• Timing Unit (TU) switch
• Object properties handling
• Locking and unlocking of objects
• Online help
7.2 Alarms
From RANOS or in the EM you are able to display a list of all alarms the RBS
may raise. From the Alarm List you are able to:
• Display alarm details
• Acknowledge alarms
• Unacknowledge alarms