User's Manual

Open Information
DESCRIPTION 2 ( 12 )
EIN/R/I Maude Andersson 1/1553-COH 109 334/1 Uen
ERA/RGG/THC 2002-05-31 B
Prepared (also subject responsible if other) No
Approved Checked Date Rev Reference
E
1 Product Data RBS 3202
1.1 Introduction
This document describes the technical data for engineering the Radio Base
Station (RBS) 3202.
1.1.1 Purpose
The purpose of this document is to provide technical data for the RBS 3202.
The data is used for installation engineering purposes and no functionality is
described in this document.
The data is structured as follows:
• Physical characteristics such as dimensions, footprints, and weight are
described in chapter 1.2.
• Standard configurations are described in chapter 1.3.
• External requirements such as grounding, climate control, power, and
physical site specifications are described in chapter 1.4.
• Connection interfaces are described in chapter 1.5.
1.1.2 Target Group
This document is written for all personnel involved in the implementation activity
of the site installation engineering.
Personnel working on Ericsson products or systems must have the training and
competence required to perform their work correctly.
1.2 Technical Data
This section provides the following technical data for the RBS 3202:
• Overview (chapter 1.2.1)
• Dimensions and footprint (chapter 1.2.2)
• Weight (chapter 1.2.3 )
1.2.1 Overview
The RBS 3202 is a Macro RBS cabinet and can be installed in a building or
in a shelter. It is assembled and tested at the factory and delivered equipped
according to the standard configuration.