Reference Manual

Call Control
TCH/F2.4 Full rate data 1.2 kbit/s transparent,
Uni-directional
TCH/F2.4 Full rate data 600 bit/s transparent,
Uni-directional
TCH/F2.4 Full rate data 1200/75 bit/s transparent,
Uni-directional
TCH/H4.8 Half rate data 4.8 kbit/s non-transparent
TCH/H4.8 Half rate data 4.8 kbit/s transparent
TCH/H2.4 Half rate data 2.4 kbit/s transparent
TCH/H2.4 Half rate data 1.2 kbit/s transparent
TCH/H2.4 Half rate data 600 bit/s transparent
TCH/H2.4 Half rate data 1200/75 bit/s (1200 network
>MS, 75 MS >network) transparent
Note: TCH/F4.8 non-transparent is only hardware supported.
Classification (see section Concepts) of elements, common for all
activation types
Channel Identification Ignored
BS Power Optional
MS Power Required
BS Power Parameters Rejected
MS Power Parameters Rejected
Physical Context Rejected
Normal Assignment /GSM 08.58:4.1/
The optional elements for Normal Assignment are:
Encryption Information Optional
Handover Reference Rejected
Timing Advance Required
SACCH Information Optional
If the parameter SACCH Information is present, the contents will be
used for this channel group instead of the information received in the
SACCH FILLING INFORMATION MODIFY procedure described in
Broadcast.
Multislot configuration (secondary channels) /GSM 08.58:4.1/
EN/LZT 720 0008 P2A
2001-11-28
271 (485)
© Ericsson Radio Systems AB
— All Rights Reserved —
Preliminary