Reference Manual

Radio Configurations, RBS 2206
** 1 x 14, 1 x 16, 1 x 18, 1 x 20 and 1 x 22 are accomplished with a
partly-equipped RBS 2.
Co-Siting with dTRU-Based RBS 2000 Using Hybrid Combiner
Using TG-synchronization, it is possible to build one resulting SCC
from the described SCC in the table below. The antenna systems are
not shared between RBSs.
Table 38 Expansion using hybrid combiner
RBS 1
RBS 2
Result
SCC
Original
SCC
Basic
Configuration
Antennas Original SCC Basic
Configuration
Antennas
3x8*
3x4 3 x G9deh_2.4 (2) (2) (2) 3x4 3 x G9deh_2.4 (2) (2) (2)
3 x G9deht_2.4 (2) (2) (2) 3 x G9deht_2.4 (2) (2) (2)
3 x G18dh_2.4 (2) (2) (2) 3 x G18dh_2.4 (2) (2) (2)
3 x G18dht_2.4 (2) (2) (2) 3 x G18dht_2.4 (2) (2) (2)
* 3 x 6 is accomplished with a partly-equipped RBS 2.
Co-Siting with dTRU-Based RBS 2000 without Hybrid Combiner
Using TG-synchronization, it is possible to build one resulting SCC
from the described SCC in the table below. The antenna systems are
not shared between RBSs.
Table 39 Expansion using CDU-G without hybrid combiner
RBS 1 RBS 2
Result
SCC
Original
SCC
Basic
Configuration
Antennas Original SCC Basic
Configuration
Antennas
3x4 3x2 3 x G9de_2.2 (2) (2) (2) 3x2 3 x G9de_2.4 (2) (2) (2)
3 x G9det_2.2 (2) (2) (2) 3 x G9det_2.4 (2) (2) (2)
3 x G18d_2.2 (2) (2) (2) 3 x G18d_2.4 (2) (2) (2)
3 x G18dt_2.2 (2) (2) (2) 3 x G18dt_2.4 (2) (2) (2)
3 x G19dh_2.4 (2) (2) (2) 3 x G19dh_2.4 (2) (2) (2)
3 x G19dht_2.4 (2) (2) (2) 3 x G19dht_2.4 (2) (2) (2)
EN/LZT 720 0008 R1A
2001-06-26
77 (421)
© Ericsson Radio Systems AB
— All Rights Reserved —