Reference Manual
Table Of Contents
- RBS 2206 Reference Manual
- Contents
- Preface
- Product Safety Requirements RBS 2000
- Environmental Capabilities
- Scope
- Terminology
- References
- Transport -40 C - +70 C
- Storage -25 C - +55 C
- Handling -40 C - +70 C
- Operation Indoor +5 C - +40 C
- Operation Outdoor -33 C - +40 C
- Operation Outdoor -33 C - +45 C
- Operation Outdoor -33 C - +55 C
- Operation Mast Mounted Equipment -33 C - +45 C
- Operation Mast Mounted Equipment -33 C - +55 C
- Radio Configurations, RBS 2206
- Product Data
- Unit Description, DXU-21
- Unit Description, dTRU
- Unit Decription, CDU-G and CDU-F
- Unit Description, CXU-10
- Unit Description, FCU-01
- Unit Description, DC-Filter 01
- Unit Description, PSU 1200 W
- Unit Description, ACCU/DCCU
- Unit Description, IDM
- Broadcast
- Common Control Channel Handling
- Physical Channel Handling
- Speech and Data Services
- Packet Data Services
- Call Control
- References
- Channel Activation
- Adaptive Frame Alignment
- Asynchronous Handover Detection
- RF Channel Release
- Deactivate SACCH
- Link Establish Indication
- Link Release Indication
- Link Establishment Request
- Link Release Request
- Transparent Message Transmission
- Transparent Message Reception
- SACCH Info Modify
- LAPDm
- Channel Reactivation
- Power Information
- GPRS, Physical Link Layer
- Base Station Power Control
- Channel Measurements
- Discontinuous Transmission
- Frequency Hopping
- Encryption
- Mode Modify
- Mobile Station Power Control
- Short Message Service
- Diversity Supervision
- Synchronization
- Radio Reception
- Radio Transmission
- Frequency Allocation Support
- Restart and Recovery
- Function Change
- Functionality Administration
- Operation and Maintenance Support
- References
- Concepts
- Buttons
- Change RU to Local Mode
- Change RU to Remote Mode
- Change RU to Remote Mode Cancel
- Change SW Power Boost Slave RU to Local Mode
- Loop Control
- RF Loop Test Supervision
- Calendar Time Request
- RSSI Temperature Compensation
- Max Cooling
- Fault Indicator
- BS Fault Indicator
- Operational Indicator
- Tx Not Enabled Indicator
- Local Mode Indicator
- External Alarms Indicator
- DC Disconnected Indicator
- Battery Mode Indicator
- Bat Disconnected Indicator
- AC Fault Indicator
- Test Result Indicators (not used)
- Local Mode in Progress
- Installation Data Handling
- Self Test and Supervision
- Diagnostics and Fault Handling
- Operation and Maintenance Terminal
- External Alarms
- Handling of Auxiliary Equipment
- Climate Protection
- EMC Capabilities
- Transmission Interface Handling G.703 2048 kbit/s
- Transmission Interface Handling DS1 1544 kbit/s
- Terrestrial Link Handling
- Channel Distribution Function
- Transport network O&M functions-DXX Support
- BTS Parameter Limitations
- Glossary
Radio Transmission
33 Radio Transmission
Radio transmission denotes the function to "Generate a Radio
Frequency (RF) signal".
33.1 References
GSM 900 and GSM 1800
/GSM:05.02/ GSM Requirements 05.02 Phase 2 version
4.6.0
/GSM:05.04/ GSM Requirements 05.04 Phase 2 version
3.1.2
/GSM:05.05/ GSM Requirements 05.05 Phase 2 version
4.13.0
/GSM:05.08/ GSM Requirements 05.08 Phase 2 version
4.6.0
/GSM:05.10/ GSM Requirements 05.10 Phase 2 version
4.2.0
GSM 1900
/GSM:05.02/ GSM Requirements 05.02 Phase 2 version
4.6.0
The references /JTC:1/ – /JTC:8/ are chapters in the document:
Volume 1, PCS 1900 Physical Layer 1
The specification is labelled: JTC(AIR)94.08.01-231R3
/JTC:1/ Physical Layer Overview
/JTC:2/ Multiplexing and Multiple Access on the
Radio Path
/JTC:3/ Forward Error Protection Coding and
Interleaving
/JTC:4/ Modulation
/JTC:5/ Radio Transmission and Reception
/JTC:6/ Radio Subsystem Link Control
/JTC:7/ Synchronization
/JTC:8/ References
When a reference is given in the text, it may have a section number
added. For example, /JTC:5.3.5/ points at chapter 5, section 3.5.
EN/LZT 720 0008 R1A
2001-06-26
259 (421)
© Ericsson Radio Systems AB
— All Rights Reserved —