Reference Manual

Table Of Contents
Mobile Station Power Control
28 Mobile Station Power Control
By means of the "MS Power Control" procedure /GSM:08.58:- 4.8/,
BSC gives RBS the power level to be used by MS, on a dedicated
resource.
MS power control is employed to minimise the transmit power required
by the MS while maintaining the quality of the radio links. By
minimising the transmit power levels, interference to co-channel users is
reduced.
Functionality supported:
MS power control, at channel activation
MS power control, for an active channel
Channel Activation function is not described here.
28.1 References
/GSM 04.04/ GSM 04.04 (phase2) version 4.0.0
/GSM 05.02/ GSM 05.02 (phase2) version 4.3.0
/GSM 08.58/ GSM 08.58 (phase2) version 4.2.0
Whenever a reference is made to a function described in another chapter,
please refer to the table of contents to nd the appropriate chapter.
28.2 Functions
28.2.1 MS Power Control at Channel Activation
Supported channel numbers:
Bm + ACCH
Lm + ACCH
SDCCH/8 + ACCH
SDCCH/4 + ACCH and TN = 0
Supported channel combinations /GSM:05.02:6.4/:
(i) TCH/F + FACCH/F + SACCH/TF
(ii) TCH/H(0.1) + FACCH/H(0.1) + SACCH/TH(0.1)
(v) FCCH+SCH+BCCH+CCCH+SDCCH/4(0..3)+SACCH/
C4(0..3)
(vii) SDCCH/8(0..7) + SACCH/C8(0..7)
(viii) TCH/F + FACCH/F + SACCH/M
(ix) TCH/F + SACCH/M
(x) TCH/FD + SACCH/MD
RBS actions:
Storage of MS power level
EN/LZT 720 0008 R1A
2001-06-26
237 (421)
© Ericsson Radio Systems AB
All Rights Reserved