Reference Manual
Table Of Contents
- RBS 2206 Reference Manual
- Contents
- Preface
- Product Safety Requirements RBS 2000
- Environmental Capabilities
- Scope
- Terminology
- References
- Transport -40 C - +70 C
- Storage -25 C - +55 C
- Handling -40 C - +70 C
- Operation Indoor +5 C - +40 C
- Operation Outdoor -33 C - +40 C
- Operation Outdoor -33 C - +45 C
- Operation Outdoor -33 C - +55 C
- Operation Mast Mounted Equipment -33 C - +45 C
- Operation Mast Mounted Equipment -33 C - +55 C
- Radio Configurations, RBS 2206
- Product Data
- Unit Description, DXU-21
- Unit Description, dTRU
- Unit Decription, CDU-G and CDU-F
- Unit Description, CXU-10
- Unit Description, FCU-01
- Unit Description, DC-Filter 01
- Unit Description, PSU 1200 W
- Unit Description, ACCU/DCCU
- Unit Description, IDM
- Broadcast
- Common Control Channel Handling
- Physical Channel Handling
- Speech and Data Services
- Packet Data Services
- Call Control
- References
- Channel Activation
- Adaptive Frame Alignment
- Asynchronous Handover Detection
- RF Channel Release
- Deactivate SACCH
- Link Establish Indication
- Link Release Indication
- Link Establishment Request
- Link Release Request
- Transparent Message Transmission
- Transparent Message Reception
- SACCH Info Modify
- LAPDm
- Channel Reactivation
- Power Information
- GPRS, Physical Link Layer
- Base Station Power Control
- Channel Measurements
- Discontinuous Transmission
- Frequency Hopping
- Encryption
- Mode Modify
- Mobile Station Power Control
- Short Message Service
- Diversity Supervision
- Synchronization
- Radio Reception
- Radio Transmission
- Frequency Allocation Support
- Restart and Recovery
- Function Change
- Functionality Administration
- Operation and Maintenance Support
- References
- Concepts
- Buttons
- Change RU to Local Mode
- Change RU to Remote Mode
- Change RU to Remote Mode Cancel
- Change SW Power Boost Slave RU to Local Mode
- Loop Control
- RF Loop Test Supervision
- Calendar Time Request
- RSSI Temperature Compensation
- Max Cooling
- Fault Indicator
- BS Fault Indicator
- Operational Indicator
- Tx Not Enabled Indicator
- Local Mode Indicator
- External Alarms Indicator
- DC Disconnected Indicator
- Battery Mode Indicator
- Bat Disconnected Indicator
- AC Fault Indicator
- Test Result Indicators (not used)
- Local Mode in Progress
- Installation Data Handling
- Self Test and Supervision
- Diagnostics and Fault Handling
- Operation and Maintenance Terminal
- External Alarms
- Handling of Auxiliary Equipment
- Climate Protection
- EMC Capabilities
- Transmission Interface Handling G.703 2048 kbit/s
- Transmission Interface Handling DS1 1544 kbit/s
- Terrestrial Link Handling
- Channel Distribution Function
- Transport network O&M functions-DXX Support
- BTS Parameter Limitations
- Glossary
Call Control
Timing Advance Required
Normal Assignment /GSM 08.58:4.1/
The optional elements for Normal Assignment are:
Encryption Information Optional
Handover Reference Rejected
Timing Advance Required
SACCH Information Optional
If the parameter SACCH Information is present, the contents will be
used for this channel group instead of the information received in the
SACCH FILLING INFORMATION MODIFY procedure described in
Broadcast.
Asynchronous Handover /GSM 08.58:4.1/
The optional elements for Asynchronous Handover are:
Encryption Information Optional
Handover Reference Required
Timing Advance Rejected
SACCH Information Optional
If the parameter SACCH Information is present, the contents will be
used for this channel group instead of the information received by the
SACCH FILLING INFORMATION MODIFY procedure described in
Broadcast.
Multislot configuration (secondary channels) /GSM 08.58:4.1/
The activation for the multislot configuration procedure is in accordance
with /GSM 08.58:4.1/.
Encryption Information Optional
SACCH Information Optional
If the parameter SACCH Information is present, the contents will be
used for this channel group instead of the information received in the
SACCH FILLING INFORMATION MODIFY procedure described in
Broadcast.
The function is initiated when a CHANNEL_ACTIVATION /
GSM 08.58:4.1/ message is received from BSC.
Packet Channel
The following actions are taken by the RBS:
• Start scheduling the PDCH multiframe on Air interface. No
power is transmitted (except for PTCCH downlink) and no
LAPDm links are inititated.
• Initiate establishment of GSL.
• Send CHANNEL_ACTIVATION_ACKNOWLEDGE to BSC.
EN/LZT 720 0008 R1A
2001-06-26
193 (421)
© Ericsson Radio Systems AB
— All Rights Reserved —