Reference Manual
Table Of Contents
- RBS 2206 Reference Manual
- Contents
- Preface
- Product Safety Requirements RBS 2000
- Environmental Capabilities
- Scope
- Terminology
- References
- Transport -40 C - +70 C
- Storage -25 C - +55 C
- Handling -40 C - +70 C
- Operation Indoor +5 C - +40 C
- Operation Outdoor -33 C - +40 C
- Operation Outdoor -33 C - +45 C
- Operation Outdoor -33 C - +55 C
- Operation Mast Mounted Equipment -33 C - +45 C
- Operation Mast Mounted Equipment -33 C - +55 C
- Radio Configurations, RBS 2206
- Product Data
- Unit Description, DXU-21
- Unit Description, dTRU
- Unit Decription, CDU-G and CDU-F
- Unit Description, CXU-10
- Unit Description, FCU-01
- Unit Description, DC-Filter 01
- Unit Description, PSU 1200 W
- Unit Description, ACCU/DCCU
- Unit Description, IDM
- Broadcast
- Common Control Channel Handling
- Physical Channel Handling
- Speech and Data Services
- Packet Data Services
- Call Control
- References
- Channel Activation
- Adaptive Frame Alignment
- Asynchronous Handover Detection
- RF Channel Release
- Deactivate SACCH
- Link Establish Indication
- Link Release Indication
- Link Establishment Request
- Link Release Request
- Transparent Message Transmission
- Transparent Message Reception
- SACCH Info Modify
- LAPDm
- Channel Reactivation
- Power Information
- GPRS, Physical Link Layer
- Base Station Power Control
- Channel Measurements
- Discontinuous Transmission
- Frequency Hopping
- Encryption
- Mode Modify
- Mobile Station Power Control
- Short Message Service
- Diversity Supervision
- Synchronization
- Radio Reception
- Radio Transmission
- Frequency Allocation Support
- Restart and Recovery
- Function Change
- Functionality Administration
- Operation and Maintenance Support
- References
- Concepts
- Buttons
- Change RU to Local Mode
- Change RU to Remote Mode
- Change RU to Remote Mode Cancel
- Change SW Power Boost Slave RU to Local Mode
- Loop Control
- RF Loop Test Supervision
- Calendar Time Request
- RSSI Temperature Compensation
- Max Cooling
- Fault Indicator
- BS Fault Indicator
- Operational Indicator
- Tx Not Enabled Indicator
- Local Mode Indicator
- External Alarms Indicator
- DC Disconnected Indicator
- Battery Mode Indicator
- Bat Disconnected Indicator
- AC Fault Indicator
- Test Result Indicators (not used)
- Local Mode in Progress
- Installation Data Handling
- Self Test and Supervision
- Diagnostics and Fault Handling
- Operation and Maintenance Terminal
- External Alarms
- Handling of Auxiliary Equipment
- Climate Protection
- EMC Capabilities
- Transmission Interface Handling G.703 2048 kbit/s
- Transmission Interface Handling DS1 1544 kbit/s
- Terrestrial Link Handling
- Channel Distribution Function
- Transport network O&M functions-DXX Support
- BTS Parameter Limitations
- Glossary
Call Control
20 Call Control
The Call Control function defines the RBS functions related to call
establishment and call control on the air interface.
20.1 References
/GSM 04.04/
/GSM 04.06/
/GSM 04.08/
/GSM 05.02/
/GSM 05.05/
/GSM 05.10/
/GSM 08.58/
Whenever a reference is made to a function described in another chapter,
please refer to the table of contents to find the appropriate chapter.
20.2 Channel Activation
Purpose
To prepare a dedicated channel for use and start up reception and
transmission on associated channels. /GSM 08.58:4.1/
Preconditions and Initiation
Supported channel combinations /GSM 05.02:6.4/
• (i) TCH/F + FACCH/F + SACCH/TF
• (ii) TCH/H(0,1) + FACCH/H(0,1) + SACCH/TH(0,1)
•
(v) FCCH + SCH + BCCH + CCCH+ SDCCH/4[0..3] + SACCH/
C4[0..3]
• (vii) SDCCH/8[0..7] + SACCH/C8[0..7]
• (viii) TCH/F + FACCH/F + SACCH/M
• (ix) TCH/F + SACCH/M
• (x) TCH/FD + SACCH/MD
Packet Switched
A52–multiframe is supported for PDCH.
The following channel combinations /GSM:05.02/ can be transmitted on
PDCH (the physical channel):
• (xi) PBCCH + PCCCH + PDTCH + PACCH + PTCCH
• (xii) PCCCH + PDTCH + PACCH + PTCCH
• (xiii) PDTCH + PACCH + PTCCH
EN/LZT 720 0008 R1A
2001-06-26
189 (421)
© Ericsson Radio Systems AB
— All Rights Reserved —