Reference Manual
Table Of Contents
- RBS 2206 Reference Manual
- Contents
- Preface
- Product Safety Requirements RBS 2000
- Environmental Capabilities
- Scope
- Terminology
- References
- Transport -40 C - +70 C
- Storage -25 C - +55 C
- Handling -40 C - +70 C
- Operation Indoor +5 C - +40 C
- Operation Outdoor -33 C - +40 C
- Operation Outdoor -33 C - +45 C
- Operation Outdoor -33 C - +55 C
- Operation Mast Mounted Equipment -33 C - +45 C
- Operation Mast Mounted Equipment -33 C - +55 C
- Radio Configurations, RBS 2206
- Product Data
- Unit Description, DXU-21
- Unit Description, dTRU
- Unit Decription, CDU-G and CDU-F
- Unit Description, CXU-10
- Unit Description, FCU-01
- Unit Description, DC-Filter 01
- Unit Description, PSU 1200 W
- Unit Description, ACCU/DCCU
- Unit Description, IDM
- Broadcast
- Common Control Channel Handling
- Physical Channel Handling
- Speech and Data Services
- Packet Data Services
- Call Control
- References
- Channel Activation
- Adaptive Frame Alignment
- Asynchronous Handover Detection
- RF Channel Release
- Deactivate SACCH
- Link Establish Indication
- Link Release Indication
- Link Establishment Request
- Link Release Request
- Transparent Message Transmission
- Transparent Message Reception
- SACCH Info Modify
- LAPDm
- Channel Reactivation
- Power Information
- GPRS, Physical Link Layer
- Base Station Power Control
- Channel Measurements
- Discontinuous Transmission
- Frequency Hopping
- Encryption
- Mode Modify
- Mobile Station Power Control
- Short Message Service
- Diversity Supervision
- Synchronization
- Radio Reception
- Radio Transmission
- Frequency Allocation Support
- Restart and Recovery
- Function Change
- Functionality Administration
- Operation and Maintenance Support
- References
- Concepts
- Buttons
- Change RU to Local Mode
- Change RU to Remote Mode
- Change RU to Remote Mode Cancel
- Change SW Power Boost Slave RU to Local Mode
- Loop Control
- RF Loop Test Supervision
- Calendar Time Request
- RSSI Temperature Compensation
- Max Cooling
- Fault Indicator
- BS Fault Indicator
- Operational Indicator
- Tx Not Enabled Indicator
- Local Mode Indicator
- External Alarms Indicator
- DC Disconnected Indicator
- Battery Mode Indicator
- Bat Disconnected Indicator
- AC Fault Indicator
- Test Result Indicators (not used)
- Local Mode in Progress
- Installation Data Handling
- Self Test and Supervision
- Diagnostics and Fault Handling
- Operation and Maintenance Terminal
- External Alarms
- Handling of Auxiliary Equipment
- Climate Protection
- EMC Capabilities
- Transmission Interface Handling G.703 2048 kbit/s
- Transmission Interface Handling DS1 1544 kbit/s
- Terrestrial Link Handling
- Channel Distribution Function
- Transport network O&M functions-DXX Support
- BTS Parameter Limitations
- Glossary
Physical Channel Handling
17 Physical Channel Handling
"Physical Channel Handling" covers the traffic services provided by the
physical layer in the RBS for the air interface.
17.1 References
/GSM:05.02/
/GSM:05.03/
Whenever a reference is made to a function described in another chapter,
please refer to the table of contents to find the appropriate chapter.
17.2 Functions
17.2.1 Supported Burst Types
The following burst types are supported /GSM:05.02:5.2/:
•
Normal burst
•
Frequency correction burst
•
Synchronisation burst
•
Dummy burst
•
Access burst
17.2.2 Supported Logical Channels
The following logical channels are supported /GSM:05.02:3/:
BCCH Broadcast Control Channel
CBCH Cell Broadcast Channel
CCCH Common Control Channel, comprising:
– AGCH Access Grant Channel
– PCH Paging Channel
– RACH Random Access Channel
FACCH/F Fast Associated Control Channel, full rate
FACCH/H Fast Associated Control Channel, half rate
FCCH Frequency Correction Channel
SACCH/C4 Slow Associated Control Channel,
dedicated control/4
SACCH/C8 Slow Associated Control Channel,
dedicated control/8
SACCH/TF Slow Associated Control Channel, full rate
traffic
EN/LZT 720 0008 R1A
2001-06-26
175 (421)
© Ericsson Radio Systems AB
— All Rights Reserved —