Reference Manual
Table Of Contents
- RBS 2206 Reference Manual
- Contents
- Preface
- Product Safety Requirements RBS 2000
- Environmental Capabilities
- Scope
- Terminology
- References
- Transport -40 C - +70 C
- Storage -25 C - +55 C
- Handling -40 C - +70 C
- Operation Indoor +5 C - +40 C
- Operation Outdoor -33 C - +40 C
- Operation Outdoor -33 C - +45 C
- Operation Outdoor -33 C - +55 C
- Operation Mast Mounted Equipment -33 C - +45 C
- Operation Mast Mounted Equipment -33 C - +55 C
- Radio Configurations, RBS 2206
- Product Data
- Unit Description, DXU-21
- Unit Description, dTRU
- Unit Decription, CDU-G and CDU-F
- Unit Description, CXU-10
- Unit Description, FCU-01
- Unit Description, DC-Filter 01
- Unit Description, PSU 1200 W
- Unit Description, ACCU/DCCU
- Unit Description, IDM
- Broadcast
- Common Control Channel Handling
- Physical Channel Handling
- Speech and Data Services
- Packet Data Services
- Call Control
- References
- Channel Activation
- Adaptive Frame Alignment
- Asynchronous Handover Detection
- RF Channel Release
- Deactivate SACCH
- Link Establish Indication
- Link Release Indication
- Link Establishment Request
- Link Release Request
- Transparent Message Transmission
- Transparent Message Reception
- SACCH Info Modify
- LAPDm
- Channel Reactivation
- Power Information
- GPRS, Physical Link Layer
- Base Station Power Control
- Channel Measurements
- Discontinuous Transmission
- Frequency Hopping
- Encryption
- Mode Modify
- Mobile Station Power Control
- Short Message Service
- Diversity Supervision
- Synchronization
- Radio Reception
- Radio Transmission
- Frequency Allocation Support
- Restart and Recovery
- Function Change
- Functionality Administration
- Operation and Maintenance Support
- References
- Concepts
- Buttons
- Change RU to Local Mode
- Change RU to Remote Mode
- Change RU to Remote Mode Cancel
- Change SW Power Boost Slave RU to Local Mode
- Loop Control
- RF Loop Test Supervision
- Calendar Time Request
- RSSI Temperature Compensation
- Max Cooling
- Fault Indicator
- BS Fault Indicator
- Operational Indicator
- Tx Not Enabled Indicator
- Local Mode Indicator
- External Alarms Indicator
- DC Disconnected Indicator
- Battery Mode Indicator
- Bat Disconnected Indicator
- AC Fault Indicator
- Test Result Indicators (not used)
- Local Mode in Progress
- Installation Data Handling
- Self Test and Supervision
- Diagnostics and Fault Handling
- Operation and Maintenance Terminal
- External Alarms
- Handling of Auxiliary Equipment
- Climate Protection
- EMC Capabilities
- Transmission Interface Handling G.703 2048 kbit/s
- Transmission Interface Handling DS1 1544 kbit/s
- Terrestrial Link Handling
- Channel Distribution Function
- Transport network O&M functions-DXX Support
- BTS Parameter Limitations
- Glossary
Broadcast
• (iv) FCCH+SCH+BCCH+CCCH
•
(v) FCCH+SCH+BCCH+CCCH+SDCCH/4(0..3)+SACCH/
C4(0..3)
Transmission on FCCH is in accordance with /GSM:05.02:5.2.4./.
Transmission on SCH means transmission of BSIC (Base Station
Identity Code) and RFN (Reduced Frame Number) in accordance with /
GSM:05.02:5.2.5./, /GSM:05.03:4.7./ and /GSM:04.08:9.1.30./.
The BSIC value is received from the BSC, as a configuration parameter.
15.3.2 Reception of BCCH_INFORMATION from BSC
By means of the BROADCAST INFORMATION MODIFY procedure /
GSM:08.58:5.5./, the BSC defines new System Information messages 1,
2, 2bis, 2ter, 3, 4, 7, 8, 13, 16 and 17 to be stored and regularly
broadcast by the RBS on the BCCH and BCCH Extended channel.
The RBS supports:
• Interpretation and check of the BCCH_INFORMATION message
from BSC
•
Storage and update of System Information 1-4 and 7-8, 13, 16 and
17
System Information is included in the BCCH_INFORMATION
message received from the BSC. New System Information received is
used in BCCH transmissions when scheduled.
Transmission of a specific System Information message can be stopped
by a BCCH_INFORMATION message /GSM:08.58:8.5.1/ on order
from the BSC.
15.3.3 Broadcast of System Information on BCCH
The RBS supports scheduled transmission of System Information on the
BCCH channel /GSM:04.08:3.2.2.1/. Reception of System Information
from the BSC is described in the section above.
Supported logical channels /GSM:05.02:3.3.2/:
BCCH Broadcast Control Channel
Supported channel combinations /GSM:05.02:6.4/:
• (iv) FCCH+SCH+BCCH+CCCH
• (v) FCCH+SCH+BCCH+CCCH+SDCCH/4(0..3)+SACCH/
C4(0..3)
The following tables define the System Information type used
depending on TC (Transaction Capabilities) /GSM:05.02:6.3.1.3/. For
TC=0, System Information type 1 is sent. If type 1 is not loaded from
the BSC, type 3 is sent.
For TC=4, System Information type 13 is sent. If type 13 is not loaded
from the BSC, type 3 is sent or, if loaded, System Information 2ter is
sent. If both System Information 2ter and 13 are loaded, they are sent
every second time.
162 (421)
EN/LZT 720 0008 R1A
2001-06-26
© Ericsson Radio Systems AB
— All Rights Reserved —