Product Description
Limited Internal
PRODUCT DESCRIPTION 26 ( 27 )
EAB/SEMCON Staffan Paulusson EN/LZT 720 0491 Uen
EAB/RKW Lena Jonsson Borg 2004-12-28 R1A
Prepared (also subject responsible if other) No
Approved Checked Date Rev Reference
E
open contact (logic one) above 100 k . The current through a closed 0
contact is 1.2 mA. The voltage between terminals with an open contact is 24
VDC.
The external alarms are defined at the installation by using the OMT, or from
the BSC using the remote OMT.
Note An installed DC/DC converter is hard-coded to alarm input 16 in
the external alarm unit. Pin 16 is therefore unavailable.
Note An installed smoke detector is hard-coded to alarm input 2 and 3
in the external alarm unit. Pins 2 and 3 are therefore unavailable.
10 Standards, Regulations and Dependability
This section provides a brief overview of standards, type approval, and EMC.
10.1 Safety Standards
In accordance with market requirements the RBS 2107 complies with the
following product safety standards:
• 73/23/EEC Low voltage directive
• IP 55 according to IEC 60529
• EN 60950-1 / IEC 60950-1
• EN 60215 / IEC 60215
• UL 60950-1
• CSA 950-1
10.2 Other Standards and Regulations
Marking
The product is marked with symbols to indicate compliance with product safety
standards.
Type Approval Standards
The RBS 2107 complies with European Community and North American market
requirements regarding radio performance. The product is marked with CE and
FCC symbols to show compliance with the legal requirements of these regions.