User's Manual Part 4

RBS 2308 and RBS 2309 User’s Guide
Connecting the OMT
1. Remove the lid from the OMT port on the IXU.
2. Connect the OMT cable from the PC serial port to the OMT port on the
right-hand side of the IXU. If an extended OMT cable is connected to the
OMT port, then connect the OMT cable to the end of the extended OMT
cable.
P010276B
L
o
c
a
l/R
e
m
o
te
IX
U
te
m
p
.
A
C
p
o
w
e
r
on
D
C
p
o
w
er on
T
ra
n
sm
iss
ion
O
K
P
o
r
t A
P
o
r
t B
P
o
r
t C
P
o
r
t D
OMT Cable
Figure 96 OMT Connection
3. Start the OMT.
Reading and Saving the Existing IDB
1. On the RBS 2000 menu, click Connect to connect the OMT logically to
the RBS.
2. On the Configuration menu, click Read IDB.
3. On the Configuration menu, click Save IDB As... and save the IDB as a
backup copy in a suitable file folder.
Modifying the IDB
1. On the RBS 2000 menu, click Disconnect to disconnect the OMT logically
from the RBS (if not already done).
2. On the Configuration menu, click Create IDB to open the Create IDB
window.
3. In the Create IDB window, select Current IDB as the default values.
4. In the Create IDB window, s elect IP as the transmission interface and click
OK.
2
67
EN
/LZT 720 0027 Uen R8A 2006-06-27