User's Manual Part 4

RBS 2308 and RBS 2309 User’s Guide
Taking the RBS Out of Operation
1.
Open the sunshields.
2.
Contact the OMC operator to obtain permission to take cells out of
service temporarily. Wait until the RF off indicator on all RRU interface
panels shows a constant light.
3.
Press the Local/Remote button
on the IXU to set the RBS to
local mode. Wait until the l ocal
indicator on the IXU shows a
constant light.
4.
Open the two clasps and pull the
RRU to the left to gain a ccess to
the power switches.
P010396A
2
31
EN
/LZT 720 0027 Uen R8A 2006-06-27