User's Manual Part 4

RBS 2308 and RBS 2309 User’s Guide
11.3.1 Taking the RBS Out o
fOperation
1.
Open the sunshields.
2.
Contact the Oper
ation and Maintenance Centre (OMC) operator to
obtain permissi
on to take cells out of service. Wait until the RF off
indicator on al
l Remote Radio Unit (RRU) interface panels shows a
constant light
.
3.
Press the Local/Remote button
on the Interface and Switching
Unit (IXU) to set the RBS to
local mode. Wait until the local
indicator on the IXU shows a
constant light.
4.
Open the two clasps and pull the
RRU to the left to gain access to
the power switches.
P010396A
262 EN/LZT 720 0027 Uen R8A 2006-06-27