User's Manual Part 4

RBS 2308 and RBS 2309 User’s Guide
Table 73 Checklist
Check the following: OK
1.
The indicators on the RRU, IXU and PSTU, if used, are in the
approved statu s.
2.
The test equipment has been disconnected from the RBS
3.
The RBS cabinet and the mounti
ng base a re free from foreig n
objects.
4.
All cabinets and cables are free of damage.
5.
All EMC sealants and cable penetrations are intact.
6.
Top and bottom of cabinet a
re free of obstructions (for airflow).
7.
The cabinet has been locked, and the screws have been tightened.
8.
All tools have been accou
nted for.
9. All paperwork has been completed.
10.6 Returning Hardware
10.6.1 Repair Delivery Note, Blue Tag
When a faulty unit is returned, it must be accompanied by a repair delivery
note. When the note has been completed it must be attached to the faulty unit
with a string, before sending it for repair. Tape must only be used to attach the
note to the sides of the unit.
Note: Do not tape a repair delivery note on the front panel as it is hard to
remove and causes extra work at the Ericsson repair c entre.
The repair delivery note LZF 084 84 can be ordered from First Line Support. An
example of a completed repair delivery note is shown below.
2
55
EN
/LZT 720 0027 Uen R8A 2006-06-27