User's Manual Part 4

RBS 2308 and RBS 2309 User’s Guide

Table 69 Objects to be Recycled or Disposed of After Cabinet Maintenance

Item

Sort or recycle?

Cable insulation from

crimping, brazing or welding

Packing chips

Foam

Polystyrene

Bubble plastic

Cable tie clippings

Sorted with plastics

Paper and wood Paper recycling

Waste metal from cable

ladders

Pieces of cable

Nuts, bolts, washers and

screws

Recycled or sorted as metals .

Note: All packing material should be re cycled, and shock absorbers disposed

of, in accordance with local recycling regulations.

Updating Site Installation Documentation

1. Check the Site Installation Documentation for deviations from the

installation.

2. Update the documents with the changes that apply.

3. Send to the person responsible for Site Installation Engineering.

Checking the RBS Indicators

This section describes how to check that the R BS indicators show the correct

status, when the RBS is connected to the BSC and is fully operational. The

check must be performed before leaving the site.

Check that the RBS indicators have the status shown in the tables below:

Table 70 RRU Indicators After Maintenance

RRU Indicator

State

Fault

Off

Operational On

Local

Off

RF off Off

AC power on On

(1)

/LZT 720 0027 Uen R8A 2006-06-27