User's Manual Part 3

RBS 2308 and RBS 2309 User’s Guide
4. In the RBS 2000 menu
,selectConnect to logically connect the OMT to
the RBS.
5. In the Configuration menu, select Read IDB
6. On the Maintenance menu, click Monitor to open the Monitor window.
See figure below.
P010476A
Figure 73 Reading Fault Status
7. In the Available monitors box, select “MO fault maps” and click → to add
“RBS” into the Monitors to start box.
8. Click Start monitor.
9. In the RBS Event Monitor window, check the MO faults box to see if there
are any faults. If there are, then correct these before c ontinuing.
When an MO fault is selected, corresponding fault description, action and
related f aults are displayed. See also:
178
EN/LZT 720 0027 Uen R8A 2006-06-27