Manualshelf

User's Manual Part 2

ManualsBrandsEricsson Radio Systems ManualsElectronicsPCS Broadband GSM Base station
71727374757677787980
RBS 2308 and RBS 2309 User’s Guide
P015681C
Sync In
Reset
10/100 Base-T
Console
100 Base-LX10
Rx
Tx
Fault
Operational
Synchronized
10/100Base-T
100Base-LX 10
PortA
PortB
PortC
PortD
Transmission OK
Link/Act
10/100 Base-T
Fault
Operational
Synchronized
10/100Base-T
100Base-LX10
PortA
PortB
PortC
PortD
Transmission OK
Link/Act
Figure 65 10/100 Base-T Electrical Ethernet Cable Connection
For more information on the commands used in the steps below, see:
PSTU Command Description 1/190 82-LZA 701 0001
2.
If optical Ethernet is used, then set the Ethernet interface type to
optical. The default value is electrical.
Command: setMoAttribute
Example:
setMoAttribute PST=0,EthernetInterface=0 type optical
3.
Set the PSTU IP_Address.
Command: setMoAttribute
Example:
setMoAttribute PST=0 IP_Address 192.168.59.64
156
EN/LZT 720 0027 Uen R8A 2006-06-27