User Manual
Table Of Contents
- toc
- RBS Product Description
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- 4 Space Requirements
- 5 Environment
- 6 Hardware Units
- 7 Interfaces
- 8 Power System
- 9 Transmission
- 10 External Alarms
- 11 Standards, Regulations and Dependability
- RBS Product Description
- tables
- Table 1 Weights
- Table 2 Colour
- Table 3 Environmental Specifications
- Table 4 Compliance Boundary Dimensions for the General Public (G
- Table 5 Characteristics for a Typical Antenna (KRE 101 1916/1)
- Table 6 Maximum Power to Antenna for Various RBS Configurations
- Table 7 RBS 2206 External Connections
- Table 8 RBS 2206 V2 External Connections
- Table 9 AC Power Requirements
- Table 10 Fuse Specifications
- Table 11 Fuse Specifications
- Table 12 +24 V DC Power Requirements
- Table 13 Fuse Specifications
- Table 14 Fuse Specifications
- Table 15 Requirements
- Table 16 Fuse Specifications
- Table 17 Fuse Specifications
- Table 18 Power Consumption RBS 2206
- Table 19 Power Consumption RBS 2206 V2
Ericsson Internal
DESCRIPTION 8 ( 34 )
/ XSNSIXI 19/1551-LZA 701 0001 Uen
CBC/ XRX/M ( Kai Lian) 2011-05-05 G
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
Layout for RBS Cabinets
P007781A
1000
1000
Unit of measurement: mm
RBS
RBS
RBS
BBS
a=130
o
Figure 2 Floor Layout and Space Requirements
The RBS cabinets and Battery Backup System (BBS) racks are mounted on
the floor, and may be positioned against a wall, back to back, or free standing
without contact with other cabinets.
Expansion cabinets and racks can be positioned to the left or to the right of the
master cabinet. However, expansion to the right is recommended in order
to follow the same standard globally.
For maintenance a distance of 1000 mm in front of the cabinets and racks
is recommended.
Note: Space for future expansion must be considered as indicated in the
dotted line in the figure above.
Earthquake Requirements
If the RBS cabinet shall fulfil the requirements for earthquake protection, the
space between wall and cabinet is to be at least 100 mm and between cabinets
at least 150 mm.