User Manual
Table Of Contents
- toc
- RBS Product Description
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- 4 Space Requirements
- 5 Environment
- 6 Hardware Units
- 7 Interfaces
- 8 Power System
- 9 Transmission
- 10 External Alarms
- 11 Standards, Regulations and Dependability
- RBS Product Description
- tables
- Table 1 Weights
- Table 2 Colour
- Table 3 Environmental Specifications
- Table 4 Compliance Boundary Dimensions for the General Public (G
- Table 5 Characteristics for a Typical Antenna (KRE 101 1916/1)
- Table 6 Maximum Power to Antenna for Various RBS Configurations
- Table 7 RBS 2206 External Connections
- Table 8 RBS 2206 V2 External Connections
- Table 9 AC Power Requirements
- Table 10 Fuse Specifications
- Table 11 Fuse Specifications
- Table 12 +24 V DC Power Requirements
- Table 13 Fuse Specifications
- Table 14 Fuse Specifications
- Table 15 Requirements
- Table 16 Fuse Specifications
- Table 17 Fuse Specifications
- Table 18 Power Consumption RBS 2206
- Table 19 Power Consumption RBS 2206 V2
Ericsson Internal
DESCRIPTION 15 ( 34 )
/ XSNSIXI 19/1551-LZA 701 0001 Uen
CBC/ XRX/M ( Kai Lian) 2011-05-05 G
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
Table 6 Maximum Power to Antenna for Various RBS Configurations
Configuration
Frequency
(MHz)
Nominal Output
Power per TRU
(dBm)/(W)
Maximum
Power into
Antenna
(1)
(dBm)/(W)
900
45.5 / 35 47.5 / 56
3x2 no hybrid
1800
44.5 / 28 46.5 / 45
900
42 / 16 47 / 50
3x4 combined
1800
41 / 13 46 / 40
900
48 / 63 50 / 100
3x2 TCC
1800
47 / 50 49 / 79
900
43 / 20 53 / 190
1x12 filter
combiner
1800
42 / 16 52 / 151
(1) Including power tolerance level (+2 dB) and transmission losses (-3 dB).
5.4 Materials
All Ericsson products fulfil the legal, market and Ericsson requirements
regarding:
• Fire resistance of material, components, wires and cables
• Declaration of materials
• Use of restricted material
• Recycling
Package Material
The package material is recyclable.
6 Hardware Units
A high level of availability is achieved using strict functional modularity with a
system of standardized units. A failed unit can easily be replaced by a new one.
The RBS cabinet contains the radio equipment, power supply and the climate
equipment (fans). All required transmission equipment and battery backup
must be housed outside the cabinet.
Outside equipment is listed under optional units. Not all HW units are covered
in this section, only those directly related to the RBS.