User Manual

Table Of Contents
Ericsson Internal
DESCRIPTION 9 ( 34 )
/ XSNSIXI 19/1551-LZA 701 0001 Uen
CBC/ XRX/M ( Kai Lian) 2011-05-05 G
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
Footprint
Unit of measurement: mm
P008315A
(RBS 2202)
RBS 2206
FRONT
99
400
598
220
45
320
400
o 20x75
Figure 3 Drilling Pattern
The RBS 2206 has the same footprint as the RBS 2202 cabinet. The base
frame is used as a template to mark new holes. If an RBS 2202 is being
replaced by an RBS 2206, the holes for the old cabinet can be used for the
new cabinet.
The RBS 2206 V2 uses the same base frame as the RBS 2206.
5 Environment
The RBS is designed to operate within limits stated for climatic requirements
and also to have a limited effect on the environment.
5.1 Operating Environment
The climatic requirements for the RBS on the site are shown in the table below.
Table 3 Environmental Specifications
Environmental
Parameters
Normal
Operation
(1)
Safe Functio
n
(2)
Non-destructive
Conditions
(3)
Temperature
+5 to +40 C
0 to +45 C
-10 to +55 C
Relative Humidity
5 85% 5 90% 5 90%