Manualshelf

Reference Manual Part 1

ManualsBrandsEricsson Radio Systems ManualsElectronicsBroadband GSM Basestation transceiver
81828384858687888990
RBS 2206
Layout for RBS Cabinets
P007781A
1000
1000
Unit of measurement: mm
RBS
RBS
RBS
BBS
a=130
o
Figure 2 Floor Layout and Space Requirements
The RBS cabinets a
nd Battery Back-up System (BBS) racks are mounted on
the floor, and may be positioned against a wall, back to back, or free standing
without contact with other cabinets.
Expansion cabine
ts and racks can be positioned to the left or to the right of the
master cabinet. However, expansion to the right is recommended in order
to follow the same standard globally.
For maintenance
a distance of 1000 mm in front of the cabinets and racks
work is recommended.
Note: Space for future expansion must be considered as indicated in the
dotted line in
the figure above.
Earthquake Requirements
If the RBS cabinet shall fulfil the requirements for earthquake protection, the
space betwee
n wall and cabinet is to be at least 100 mm and between cabinets
at least 150 mm.
7 (28)
EN/LZT 720 0225 Uen R6A