Reference Manual Part 1

RBS 2106
Ground Vibrations
The RBS 2106 is designed to satisfy earthquake protection according to IEC
68-2-57.
Levelling
To ensure that the cabinet is level, the floor must be level to within ±3 mm/2000
mm and the floor gradient must be within ±0.1
.
4.2 Environmental Impact
This section describes the effects that the cabinet has on the environment.
Heat Dissipation
The RBS 2106 generates an average heat load of 3000 W. The exact figure is
dependent upon configuration, equipment, and site-specific conditions.
Acoustic Dispersion
The cabinet noise dispersion for an RBS 2106 with Combined Climate Unit
is shown in the two figures below. The figures show the noise dispersion
generated by a free-standing cabinet and by a cabinet mounted against a wall.
Note: The acoustic noise dispersion values for a free-standing cabinet and
a cabinet installed against a wall were tested according to the ISO
9614-2 standard. Deviations from these values can be experienced
due to the nature of materials in the environment where the cabinet
is installed. Objects near the cabinet can reflect or absorb sound and
thus affect acoustic dispersion.
10 (36)
E
N/LZT 720 0222 Uen R6A