Reference Manual Part 1

Hardware Reference Manual RBS 2106, RBS 2206, RBS 2207
Requirements
Table 9 Environmental limits for storage conditions
Environmental Parameters Unit Value
Temperature
C
-25 - +55
Relative humidity
% 10 - 100
Absolute humidity g/m
3
0.5 - 29
3.5.3 Biological Conditions
The severity of these requirements is in conformity with IEC 721-3-1 class
1B2. and ETS 300 019-1-1 class 1.2.
3.5.4 Chemically Active Substances
The severity of these requirements is in conformity with: IEC 721-3-1 class
1C2 and ETS 200 019-1-1 Class 1.2.
Note: The values are average yearly levels of airborne contaminants that can
be accepted. It is assumed that one of the contaminants is dominant at
each site, and that the other is present in insignificant amounts.
3.5.5 Mechanically Active Substances
The severity of these requirements is in conformity with: IEC 721-3-1 class
1S3. and ETS 300 019-1-1 Class 1.2.
3.5.6 Mechanical Conditions
The packing and transport method shall be chosen in order not to expose
the equipment to stress beyond these limits. The equipment shall function
as specified when installed after test.
The severity of these requirements is in conformity with: IEC 721-3-1 class
1M2. and ETS 300 019-1-1 Class 1.2.
Requirements
Table 10 Mechanical parameters for storage conditions
Environmental Parameters Unit Value
Vibration sinus:
displacement
mm
3.5
acceleration m/s
2
10
15EN_LZT_720_0024 Uen R7A 2004-08-19