Manual Part 6

DC Filter-04 for RBS 2207
4 Interface
4.1 Signal and Power Interfaces
The DC filter has the following external interfaces:
• Two input terminals for 16 – 150 mm
2
• Pull-relief clamps for incoming power cables with diameter 10 – 26 mm
• Two 35 mm
2
output cables
Table 2 Input Data
Input Voltage Nominal +24 V DC
Range 20.0 – 29.0 V DC
Non-destructive Range 0.0 – +32.0 V DC
Max Input Current
90 A
Ericsson AB
SE-164 80 Stockholm
Sweden
[e-mail]
No part of this document may be reproduced in any form without
the written permission of the copyright owner.
The contents of this document are subject to revision without
notice due to continued progress in methodology, design and
manufacturing. Ericsson shall have no liability for any error or
damage of any kind resulting from the use of this document.
© Ericsson AB 2004 — All Rights Reserved
4 (4)
EN/LZT 720 0488 Uen R1A