Manual Part 5

ADM-01
Table 3 Input Power
Nominal Voltages Input Power Input Fuse Rating
+24 V DC 2 x 250 W 2 x 15 A
-48 V DC 2 x 200 W 2 x 10 A
+24 and -48 V DC 250 + 200 W 15 and 10 A
Note: The total input power to the ADM-01 must not exceed 500 W.
Output Data
The output data is shown in the table below.
Table 4 Output Connections
Output Connection
Fuse
DC out TM1, pos. 1 – 5 Screw terminals
0.5 – 2.5 mm
2
6 A
DC out TM2, pos. 1 – 5 Screw terminals
0.5 – 2.5 mm
2
6 A
+24 V DC Out RPV 403 109/604 6 A
4.2 Operator Interface
Output power can be manually switched off using the eleven circuit breakers
on the front panel.
Table 5 Indicators
Indicator
Colour
+24 V DC present Green
-48 V DC present Green
Ericsson AB
SE-164 80 Stockholm
Sweden
[e-mail]
No part of this document may be reproduced in any form without
the written permission of the copyright owner. The contents of
this document are subject to revision without notice due to
continued progress in methodology, design and manufacturing.
Ericsson shall have no liability for any error or damage of any
kind resulting from the use of this document.
© Ericsson AB 2004 — All Rights Reserved
8 (
8)
EN/LZT 720 0300 Uen R2A