Manual Part 5

ACCU -03
• Termi nal block for incoming AC mains cables
• Two connection points for outgoing cables to the PSUs
4.1 Signal and Power Interfaces
Input Data
The input data fo r the ACCU is summarised in the t able below.
Table 2 In put Data
Frequency 50 – 60 Hz
Voltage 120 – 250 AC nominal
External Fuses 2 pcs, max. 16 A
Cable Diameter
8.5 – 12.5 mm
Conductor Area
1.5 – 2.5 mm
2
Number of Conductors
3 (L, L/N, PE)/cable
Outpu t Data
Two cables with connectors (according to IEC 320 and for connection to the
PSU AC inlet).
Ericsson AB
SE-164 80 Stockholm
Sweden
[e-mail]
No part of this document may be reproduce d in any form without
the written permission of the copyright ow ner.
The contents of this document are subject to revis ion withou t
notice due to continued progress in methodology, design and
manufactu ring. E ricsson shall have no liability for any er ror or
damage of any kind resulting from the use of this document.
© Ericsson AB 2004 — All Rights Reserved
4 (4)
EN/LZT 720 0484 Uen R1A