User Manual

Ericsson Internal
DESCRIPTION 14 ( 34 )
/ XSNSIXI 19/1551-LZA 701 0001 Uen
CBC/ XRX/M ( Kai Lian) 2011-05-05 G
Prepared (also subject responsible if other) No.
Approved Checked Date Rev Reference
Table 4 Compliance Boundary Dimensions for the General Public (GP) and
Occupational (O) Exposure for Typical Configurations
Dimensions of Cylindrical Compliance
Boundary in Meter (m)
Diameter Height Distance
Behind
Antenna
Configuration
Frequency
(MHz) GP O GP O GP O
900 6 3 1.7 1.5 0.1 0.1
3x2 no hybrid
1800
5
1 1.6 1.4 0.1 0.05
900 6 3 1.7 1.5 0.1 0.1
3x4 combined
1800
5
1 1.6 1.4 0.1 0.05
900 9 4 1.9 1.6 0.1 0.1
3x2 TCC
1800
7
2 1.6 1.5 0.1 0.1
900 12
5
2.3 1.6 0.1 0.1
1x12 filter
combiner
1800 10 4 1.9 1.6 0.1 0.1
The cylinder shape overestimates the compliance distances right beside the
antenna. In reality the occupational compliance distance by the side, in line
with the front of the antenna, is less than 0.1 metre for output power levels
below 56 W and less than 0.3 metre for the other power levels reported here.
For characteristics of an antenna recommended for typical configurations of an
RBS 2206, see table below.
Table 5 Characteristics for a Typical Antenna (KRE 101 1916/1)
Antenna Specifications
X-pol macro RBS sector antenna
Antenna Height
1.3 m
Horizontal Half-power Beam Width
60 degrees
Vertical Half-power Beam Width
15 degrees at 900 MHz
7 degrees at 1800 MHz
Antenna Gain
14.5 dBi at 900 MHz
17 dBi at 1800 MHz
Down Tilt
0 degrees
The nominal maximum power fed to the antenna, as a function of the number
of Transceiver Units (TRU) per antenna and the maximum power (including
tolerances and transmission loss) per TRU, for RBS at 900 MHz and 1800 MHz,
are given in Table 6.