User Manual
Table Of Contents
- toc
- RBS 2107
- 1 Product Overview
- 2 Dimensions
- 3 Space Requirements
- 4 Environment
- 5 Hardware Units
- 6 Interfaces
- 8 Transmission
- 9 External Alarms
- 10 Standards, Regulations and Dependability
- RBS 2107
- tables
- Table 1 RBS 2107 Weights
- Table 2 RBS 2107 Colours
- Table 3 Climatic Requirements
- Table 4 Compliance Boundary Dimensions for the General Public (G
- Table 5 Characteristics for a Typical Antenna (KRE 101 1916/1)
- Table 6 Maximum Power to Antenna for Various RBS 2107 Configurat
- Table 7 Cable Gland Capacity
- Table 8 Optional Configurations in the DF
- Table 9 OVP Modules Capacity
- Table 10 Antenna Connections
- Table 11 External Connections
- Table 12 Switches and Circuit Breakers
- Table 13 Power Parameters
- Table 14 Mains Fuses Recommendation
- Table 15 Output Power
- Table 16 Power Consumption
RBS 2107
Footprint
The footprint of the RBS 2107 is 1000 mm wide and 710 mm deep. Note that
the door, which protudes 216 mm, is not included in the footprint because its
lower edge is clear of the ground.
Unit of measurement: mm
65
20
P012650A
1000
125
350
425
50
710
355
665
850
935
Figure 4 Install
ation Frame Holing Pattern
4 Environment
The RBS 2107 is designed to operate within the limits stated for climatic
requirements
listed in the table below, and to withstand ground vibrations as
stated below.
4.1 Operating En
vironment
The table below shows the operating environment and climatic specifications
for the RBS 2107.
7 (28)
EN/LZT 720 0491 Uen R2A