User Manual
Table Of Contents
- toc
- RBS 2107
- 1 Product Overview
- 2 Dimensions
- 3 Space Requirements
- 4 Environment
- 5 Hardware Units
- 6 Interfaces
- 8 Transmission
- 9 External Alarms
- 10 Standards, Regulations and Dependability
- RBS 2107
- tables
- Table 1 RBS 2107 Weights
- Table 2 RBS 2107 Colours
- Table 3 Climatic Requirements
- Table 4 Compliance Boundary Dimensions for the General Public (G
- Table 5 Characteristics for a Typical Antenna (KRE 101 1916/1)
- Table 6 Maximum Power to Antenna for Various RBS 2107 Configurat
- Table 7 Cable Gland Capacity
- Table 8 Optional Configurations in the DF
- Table 9 OVP Modules Capacity
- Table 10 Antenna Connections
- Table 11 External Connections
- Table 12 Switches and Circuit Breakers
- Table 13 Power Parameters
- Table 14 Mains Fuses Recommendation
- Table 15 Output Power
- Table 16 Power Consumption
RBS 2107
Surface and Colour
The RBS 2107 has a surface quality according to Ericsson standard class
A3/B6.
Table 2 RBS 2107 Colours
Colour Reference Number
Ericsson Number
Grey RAL 7035 MZY 509 01/8119
3 Space Requirements
Installation and maintenance require that the door can be opened at least 90
.
In practice this means that the space in front of the cabinet must be kept clear
for a distance of 1000 mm, see figure below. No free space is needed at the
back of the cabinet.
If the RBS is located next to another cabinet of the same depth, no adjacent
space is required. If the RBS is placed next to a wall, or any object protrudes
on the left side, then 175 mm clearance is required to the left of the cabinet.
p012633A
Unit of measurement: mm
90
r = 1000
Figure 3 Door Opening Requirements
Note: All installation and maintenance work c
an be performed with the door
open 90
.
During service a tent can be placed over the cabinet to protect the equipment
from bad weather.
6 (28)
E
N/LZT 720 0491 Uen R2A