Reference Manual

RBS 2106 and RBS 2206Radio Configurations
** 1 x 10, 1 x 12, 1 x 14, 1 x 16 and 1 x 18 can be accomplished with a
partly-equipped expansion configuration.
*** 3 x 6 can be accomplished with a partly-equipped expansion configuration.
**** When using TG-synchronization, only one RBS 200/RBS 205 can act as
master. Therefore the 3 x 4 configuration, which contains three separate RBSs,
must be rebuilt to one single RBS; that is, all three sectors of the RBS 200
must be connected to the same TMCB.
&R6LWLQJ ZLWK 5%6  8VLQJ +\EULG &RPELQHU
7DEOH  ([SDQVLRQ XVLQJ K\EULG FRPELQHU
2ULJLQDO &RQILJXUDWLRQ ([SDQVLRQ &RQILJXUDWLRQ
5H
VXOW
6&&
2ULJ
LQDO
6&&
&DEL
QHW
&RPEL
QHU
$QWHQ
QDV
70$
2ULJ
LQDO
6&&
%DVLF &RQ
ILJXUDWLRQ
$QWHQQDV
3x8* 3x4
**
RBS
200
HCOMB (3) (3) (3) No 3x4 3x
G9dh_2.4
(2) (2) (2)
RBS
205
HCOMB (3) (3) (3) No 3x
G18dh_2.4
(2) (2) (2)
RBS
205
HCOMB (3) (3) (3) M 3x
G18dht_2.4
(2) (2) (2)
RBS
205
HCOMB
&DPX
(2) (2) (2) No 3x
G18dh_2.4
(2) (2) (2)
RBS
205
HCOMB (2) (2) (2) M 3x
G18dht_2.4
(2) (2) (2)
M = Mandatory
* 3 x 6 can be accomplished with a partly-equipped expansion configuration.
1 x 8 can be accomplished with one RBS 200/RBS 205 and a partly-equipped
expansion configuration.
** When using TG-synchronization, only one RBS 200/RBS 205 can act as
master. Therefore the 3 x 4 configuration, which contains three separate RBSs,
must be rebuilt to one single RBS; that is, all three sectors of the RBS 200
must be connected to the same TMCB.
80 (90)
EN/LZT 720 0318 Uen R1A