User's Manual

RBS 2308Micro RBS
MINI-LINK or LMU Power Supply
The RBS 2308 can supply DC power to a MINI-LINK E Micro or to an LMU.
This interface is located on the IXU, see figure below.
P010596A
DC to MINI-LINK or LMU
Figure 10 Location of MINI-LINK / LMU power supply in IXU
Parameters for the MINI-LINK / LMU power supply are given in the table below.
Table 13 MINI-LINK / LMU DC supply connection parameters
Type of connector Terminals for 2 x 2.5 mm
2
(maximum)
Cable gland capacity 6 – 10 mm diameter (Quantity: 1)
Note: The maximum cable length between the IXU and the LMU is 5 m.
18 (30)
EN/LZT 720 0327/3 Uen R1A