User Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Product Overview
- 3 Dimensions
- Size and Weight
- Surface and Colour
- 4 Space Requirements
- Footprint
- 5 Environment
- 6 Hardware Units
- 7 Interfaces
- 7.1 External Connections
- Connections on DF
- Overvoltage Protection Modules in the RBS 2106i and RBS 2106 V3
- Overvoltage Arrestors for External Alarms in the RBS 2106
- Antenna Connections
- Other External Connections
- External Connections to TM
- Transport Network to TM
- 7.2 Test Interface
- 7.3 Operator Interface
- Indicators
- Buttons
- 8 Power System
- 8.1 Power Supply
- AC Mains Supply Voltage
- External Earth Fault Circuit Breakers
- Mains Fuses
- 8.2 Battery Backup
- Internal Battery Backup
- External Battery Backup
- 8.3 Output Power to TM
- 8.4 Power Consumption
- 9 Transmission
- Optional Transmission Equipment
- 10 External Alarms
- 11 Standards, Regulations and Dependability
PRELIMINARY
RBS Product Description
11 Standards, Regulations and Dependability
This section provides a brief overview of standards, type approval, and EMC.
11.1 Safety Standards
In accordance with the market requirements, the RBS 2106 complies with the
following product safety standards:
• 73/23/EEC Low voltage directive
• IP 55 according to IEC 60529
• EN 60950 / IEC 60950
• EN 60215 / IEC 60215
• UL 1950
• CSA 22.2 No. 950
11.2 Other Standards and Regulations
Marking
The product is marked with symbols to indicate compliance with product safety
standards.
Type Approval Standards
The RBS complies with the European Community and the North America
market requirements regarding radio performance. The product has the CE
and FCC symbols to indicate compliance with the legal requirements of the
respective region.
EMC
The RBS complies with the European Community and the North America
market requirements regarding EMC. The product has the CE and FCC signs
to indicate compliance with the legal requirements of the respective region.
46
129/1551-LZA 701 0001 Uen PF1 | 2010-10-08