Reference Manual

RBS 2206 Radio Base Station
EN/LZT 720 0225 R3A 19 (24)
There are two ways to connect power to the base station. They are:
Single phase line to neutral.
Single phase line to line.
Note: When single phase line to line is used, each PSU requires two circuit
breakers.
Table 9 AC mains power requirements
Voltage range for specified
Performance (phase voltage)
120 – 250 V AC
Voltage range 108 – 275 V AC
(1)
Frequency 45 – 65 Hz
Inrush current, max. 30 A (1 – 30 ms)
Maximum AC power 1.4 kW x 4
Non-destructive range 0 – 275 V AC
Overvoltage <20 ms 325 V
(2)
Maximum ground leakage current 10 mA x 4
1) 90 – 108 V AC with reduced output power. 1000 W per PSU
2) Install external filter and stabiliser if not met.