User's Manual Part 3

RBS 2109 User’s Guide

9.5.11 Performing Concluding Routines

This section describes the routines to be completed before leaving the site.

Note: Ericsson strongly advises that when cleaning up after maintenance

work on the RBS cabinet, the personnel performing maintenance pay

particular attention to the environment. Recycle all waste materials that

can be recycled and sort waste so that it can be disposed of according

to local regulations.

Table 61 Objects to be Recycled or Disposed of After Cabinet Maintenance

Item

Sort or recycle?

Cable insulation from

crimping, brazing or

welding

Packing chips

Foam

Polystyrene

Bubble plastic

Cable tie clippings

Sorted with plastics

Paper and wood Paper recycling

Waste metal from cable

ladders

Pieces of cable

Nuts, bolts, washers and

screws

Recycled or sorted as metals.

Note: All packing material should be recycled, and shock absorbers disposed

of, in accordance with local recycling regulations.

Updating Site Installation Documentation

1. Check the Site Installation Documentation for deviations from the

installation.

2. Update the documents with the changes that apply.

3. Send to the person responsible for Site Installation Engineering.

Checking RRU and IXU Indicators

This section describes how to check that the RRU and IXU indicators show the

correct status, when the RBS is connected to the BSC and is fully operational.

The check should be performed before leaving the site.

N/LZT 720 0090 Uen R1A 2004-09-17