User's Manual Part 3

RBS 2109 User’s Guide
Replacing Y Link Cable
6
Open the IXU cover.
P010357B
7
Remove the faulty Y link cable
from the IXU. Remove the cable
from the RRU by opening the Y
link cover and disconnecting it.
P010379A
IXU
RRU
8
Connect the new Y link cable to the RRU and close the cover.
9
Connect the new Y link cable to the IXU and close the cover.
10
Switch on the RRU power and close the RRU.
Taking the RRU Into Service
11
Inform the OMC operator that the RRU is to be taken into service.
12
Press the Local/Remote button on the RRU to set the unit to remote
mode. Wait until the RF off indicator on the RRU interface panel
extinguishes and the Operational indicator illuminates.
13
Close the sunshields.
217EN/LZT 720 0090 Uen R1A 2004-09-17