User's Manual Part 3

RBS 2109 User’s Guide
3
If a fan unit is used, then install the fan unit cover on top of the RRU,
see Figure below.
P010515A
4
Attach the front sunshield to the left sunshield.
5
Close the front sunshield and attach it to the top shield (fan unit
cover) and to the right sunshield.
6
Lock the shield.
Handling Replaced Units
Unless under contractual warranty, after replacement, the sunshield should be
disposed of locally by the customer according to environmental regulations. Do
not return the sunshield to Ericsson for replacement, repair or disposal.
9.5.10 Y Link Cable Replacement
This section describes how to replace a faulty Y link cable.
215EN/LZT 720 0090 Uen R1A 2004-09-17