User's Manual Part 3

RBS 2109 User’s Guide
7.9.4 Filling in Checklist
The following checklist is not mandatory but strongly recommended. Local
procedures and safety regulations must be evaluated and included in this
checklist.
Table 45 Checklist
Check the following: OK
1
The indicators on the RRU and the IXU are in the approved
status.
2
The test equipment has been disconnected from the RBS
3
The RBS cabinet and the mounting base are free from foreign
objects.
4
All cabinets and cables are free of damage.
5
All EMC sealants and cable penetrations are intact.
6
Top and bottom of cabinet are free of obstructions (for airflow).
7
The cabinet has been locked, and the screws have been
tightened.
8
All tools have been accounted for.
9
All paperwork has been completed.
1
42
E
N/LZT 720 0090 Uen R1A 2004-09-17