User's Manual Part 3

RBS 2109 User’s Guide
8
Disconnect the upper AC/DC
cables and the applicable power
cable at the bottom.
P010372A
9
Remove the PIB after loosening
the securing screws.
P010373B
(x8)
Note: Be careful not to drop the washer attached behind the lower left screw
when loosening it.
10
Insert the new PIB and secure it.
11
Ensure that the ground selector swicth is in the correct position.
Note: Remember to insert the washer behind the lower left screw.
12
Reconnect the upper AC/DC cables.
13
Reconnect the applicable AC/DC cable at the bottom.
14
Reconnect the protection earth cable.
15
Refit the cover.
2
04
E
N/LZT 720 0090 Uen R1A 2004-09-17