User's Manual Part 3

RBS 2109 User’s Guide
Note: Make a note of which connectors the Y link cables were connected to.
10
Loosen the two securing screws
under the IXU and remove the
unit.
P010365B
11
Remove the c
over for the flash
card. To rem
ove the flash card,
lift up the r
elease lever and then
push it in.
P010366A
12
Insert the new flash card, reset the lever, then refit the cover.
Note: The flash card should be preloaded with the correct software and IDB.
For instructions, see Chapter Site Installation Tests.
13
Mount the IXU and secure it with the two screws under the IXU.
14
Connect the Y link cable(s). Ensure the Y link cable(s) are connected
to the correct connector(s).
15
Mount the connection frame and connect all cables. Close the IXU
cover.
16
Connect the earth cable and the AC/DC cable.
1
90
E
N/LZT 720 0090 Uen R1A 2004-09-17