User's Manual Part 3

RBS 2109 User’s Guide
P011186A
Figure 81 Cable Connection Check
P010514A
- 48 V
LINK
48 V 48 V_RTN
Figure 82 Connector Connection Check
7. Perform a cold reset on the GPS by disconnecting the termination block for
a few seconds.
8. Check that both the – 48 V LINK cable and the conductor are free from
damage. Replace if needed.
9. Check that the voltage is – 48 V DC, using a multimeter.
173EN/LZT 720 0090 Uen R1A 2004-09-17