User's Manual Part 3

RBS 2109 User’s Guide
P010476A
Figure 76 Reading Fault Status
7. In the Available monitors box, select ‘‘MO fault maps’’ and click → to add
‘‘RBS’’ into the Monitors to start box.
8. Click Start monitor.
9. In the RBS Event Monitor window, check the MO faults box to see if there
are any faults. If there are, then correct these before continuing.
When an MO fault is selected, corresponding fault description, action and
related faults are displayed. See also Fault List.
10. When all faults are corrected, close the RBS Event Monitor window.
9.3.2 SO CF RU:0/ IXU
This section describes how to localise an SO CF RU:0/ IXU fault.
1
60
E
N/LZT 720 0090 Uen R1A 2004-09-17