User's Manual Part 2

RBS 2109 User’s Guide
2
Strap the cables using the
appropriate cable tie anchor.
P012173A
3
Install the protective cover under
the RRU.
P010565A
5.4.14 Testing the Installation
The RBS is now ready for the site installation tests.
The site installation tests should be performed directly after the completion of
the RBS installation, see Chapter Site Installation Tests.
After the installation and integration testing is completed, return to Section
5.4.15 on page 69.
5.4.15 Installing the Sunshields
This section describes how to install the sunshields.
69EN/LZT 720 0090 Uen R1A 2004-09-17