User's Manual Part 2

RBS 2109 User’s Guide
Work Process for Antenna System Tests
This section describes the order in which to perform the tests. When the exit
criteria for each procedure are fulfilled, the tester enters the results in the test
record, then returns to the work process for the next step.
Figure 31 Work Process for Antenna System Tests
The work order can be altered or tests can be removed due to local
circumstances. In this event, an investigation of the consequences must
be carried out. If the work order is changed or tests are removed, then the
department responsible for this manual must be notified and agree to changes,
or the responsibility is automatically transferred to the person making the
decision.
75EN/LZT 720 0090 Uen R1A 2004-09-17