User's Manual Part 2

RBS 2109 User’s Guide
3. Attach the front sunshield to the left sunshield.
4. Close the front sunshield and attach it to the top shield (fan cover) and to
the right sunshield.
5. Lock the shield.
5.4.16 Performing Concluding Routines
This section describes the routines to be completed before leaving the site.
Note: Ericsson strongly advises that when cleaning up after installing the
RBS, the personnel performing the installation pay particular attention
to the environment. Primarily, recycle all waste materials that can be
recycled and sort waste so that it can be disposed of according to
local regulations.
Table 11 Objects to Be Recycled or Disposed of After RBS Installation
Item
Sort or Recycle?
Cable insulation from
crimping, brazing or
welding
Packing chips
Foam
Polystyrene
Bubble plastic
Cable tie clippings
Sorted with plastics
Paper and wood Paper recycling
Waste metal from cable
ladders
Pieces of cable
Nuts, bolts, washers and
screws
Recycled or sorted as metals
Note: All packing material should be recycled, and shock absorbers disposed
of, in accordance with local recycling regulations.
5.4.16.1 Updating the Site Installation Documentation
1. Check the Site Installation Documentation for deviations from the
installation.
2. Update the documents with the changes that apply.
3. Send the documents to the person responsible for Site Installation
Engineering.
71EN/LZT 720 0090 Uen R1A 2004-09-17